Упорные шариковые
Bearings
511 / 512 / 513 / 514 / 532 / Серия 533 | 10–500mm Отверстие | Single & Двунаправленная
Purpose-designed for pure осевая нагрузка applications. Separable three-piece construction — вальцевая шайба, корпусная шайба, and шариково-сепараторная сборка — позволяет independent mounting of each component. Доступно с flat or spherical back-face washers for static misalignment compensation. Trusted in machine tool spindles, поворотный столs, vertical вал arrangements, крюк кранаs, and ход screw support.
Упорные шарикоподшипники for Осевая нагрузка Применения
Luoyang Songju thrust шарикоподшипники are manufactured in six dimensional series — 511, 512, 513, 514, 532, and 533 — engineered for applications where the primary load is axial (thrust). Each bearing is manufactured from high-carbon chromium подшипниковая сталь GCr15 (100Cr6 / 52100) in our производственный объект с сертификатом ISO 9001:2015.
Разъёмная three-piece design — consisting of a вальцевая шайба, корпусная шайба, and шариково-сепараторная сборка — allows each component to be mounted independently for simplified installation. This is especially valuable in applications where the вал and корпус are difficult to access simultaneously, or where the washers must be mounted with посадка с натягомs.
The 532 and 533 series incorporate spherical корпусная шайбаs and aligning seat washers, enabling the bearing to compensate for static угловое смещение between the вал and корпус — a critical feature in applications where perfect perpendicularity cannot be guaranteed or where structural deflection occurs under load.
Одно- и двунаправленные
Thrust шарикоподшипники are available in two fundamental configurations. Однонаправленная bearings (511–514, 532–533) accept осевая нагрузка in one direction only and are the most common type for general industrial applications. Двунаправленная bearings (522–524, 542–544) incorporate two rows of balls and can accommodate осевая нагрузкаs from both directions — ideal for reversing thrust applications, двунаправленная ход screws, and vertical spindles subject to both upward and downward forces.
532 / 533
542 / 543 / 544
Six Series for Every Осевая нагрузка Requirement
From compact light-series 511 to тяжёлый 514 — select the right thrust шарикоподшипник for your application requirements
Серия 511
Однонаправленная, flat back-face. The most compact and economical thrust шарикоподшипник series. Идеально для light to moderate осевая нагрузкаs in vertical вал поддерживает, steering columns, and general industrial machinery.
Серия 512
Однонаправленная, flat back-face with larger поперечное сечение than 511. Handles significantly higher осевая нагрузкаs for the same размер отверстия. Widely used in machine tool spindle thrusts and rotary indexing tables.
Серия 513
Однонаправленная, flat back-face with heavy поперечное сечение. Предназначено для high осевая нагрузкаs in demanding industrial applications — крюк кранаs, тяжёлый вертикальный насосs, экструдер thrusts, and кузнечный пресс screws.
Серия 514
Однонаправленная, flat back-face with maximum поперечное сечение for the highest осевая нагрузка capacity. Создано для extreme thrust applications — large вертикально-расточный станокs, гидротурбина thrust pads, and marine propeller вал поддерживает.
Серия 532
Однонаправленная with spherical корпусная шайба and aligning seat. Compensates for static угловое смещение between вал and корпус. лёгкие-to-medium поперечное сечение for applications where mounting precision cannot be guaranteed.
Серия 533
Однонаправленная with spherical корпусная шайба and heavy поперечное сечение. Combines high осевая нагрузка capacity with self-alignment capability — ideal for тяжёлый applications with potential misalignment such as large крюк кранаs and строительный подшипникs.
Упорные шариковые Bearing Модель Параметры
Полный список моделей 511, 512, 513, 514, 532, and 533 series. d = Отверстие diameter, D = наружный диаметр, T = Высота, Ca = Динамическая осевая нагрузка rating, C0a = Статическая осевая нагрузка rating. All data per SKF/NTN/NSK standard catalogs.
Extra лёгкие Single-Direction — Серия 511
16 представительных моделей | Данные по каталогам SKF/NTN/NSK
| Модель | d (mm) | D (mm) | T (mm) | Ca (kN) | C0a (kN) | Масса (кг) |
|---|---|---|---|---|---|---|
| 51100 | 10 | 24 | 9 | 10.1 | 14.9 | 0.020 |
| 51101 | 12 | 26 | 9 | 10.4 | 16.2 | 0.022 |
| 51102 | 15 | 28 | 9 | 10.6 | 17.6 | 0.024 |
| 51103 | 17 | 30 | 9 | 10.8 | 18.2 | 0.026 |
| 51104 | 20 | 35 | 10 | 14.6 | 26.5 | 0.038 |
| 51105 | 25 | 42 | 11 | 17.6 | 35.4 | 0.056 |
| 51106 | 30 | 47 | 11 | 18.8 | 40.9 | 0.064 |
| 51107 | 35 | 52 | 12 | 20.8 | 48.6 | 0.082 |
| 51108 | 40 | 60 | 13 | 26.9 | 62.9 | 0.114 |
| 51109 | 45 | 65 | 14 | 27.6 | 69.6 | 0.140 |
| 51110 | 50 | 70 | 14 | 28.8 | 75.5 | 0.152 |
| 51112 | 60 | 85 | 17 | 41.2 | 113.0 | 0.278 |
| 51114 | 70 | 95 | 18 | 43.0 | 127.0 | 0.332 |
| 51116 | 80 | 105 | 19 | 44.8 | 141.0 | 0.404 |
| 51118 | 90 | 120 | 22 | 59.5 | 190.0 | 0.658 |
| 51120 | 100 | 135 | 25 | 85.0 | 268.0 | 0.942 |
лёгкие Single-Direction — Серия 512
16 представительных моделей | Данные по каталогам SKF/NTN/NSK
| Модель | d (mm) | D (mm) | T (mm) | Ca (kN) | C0a (kN) | Масса (кг) |
|---|---|---|---|---|---|---|
| 51200 | 10 | 26 | 11 | 12.7 | 17.1 | 0.030 |
| 51201 | 12 | 28 | 11 | 13.2 | 19.0 | 0.034 |
| 51202 | 15 | 32 | 12 | 16.6 | 24.8 | 0.046 |
| 51203 | 17 | 35 | 12 | 17.2 | 27.3 | 0.052 |
| 51204 | 20 | 40 | 14 | 22.8 | 37.7 | 0.082 |
| 51205 | 25 | 47 | 15 | 27.8 | 50.4 | 0.110 |
| 51206 | 30 | 52 | 16 | 29.3 | 58.2 | 0.138 |
| 51207 | 35 | 62 | 18 | 39.4 | 78.2 | 0.220 |
| 51208 | 40 | 68 | 19 | 47.3 | 98.2 | 0.278 |
| 51209 | 45 | 73 | 20 | 48.5 | 105.0 | 0.310 |
| 51210 | 50 | 78 | 22 | 52.5 | 118.0 | 0.374 |
| 51212 | 60 | 95 | 26 | 73.3 | 172.0 | 0.714 |
| 51214 | 70 | 105 | 27 | 76.6 | 198.0 | 0.840 |
| 51216 | 80 | 115 | 28 | 86.2 | 236.0 | 0.968 |
| 51218 | 90 | 135 | 35 | 125.0 | 340.0 | 1.860 |
| 51220 | 100 | 150 | 38 | 136.0 | 390.0 | 2.400 |
средние Single-Direction — Серия 513
12 представительных моделей | Данные по каталогам SKF/NTN/NSK
| Модель | d (mm) | D (mm) | T (mm) | Ca (kN) | C0a (kN) | Масса (кг) |
|---|---|---|---|---|---|---|
| 51304 | 20 | 42 | 16 | 30.5 | 47.5 | 0.120 |
| 51305 | 25 | 52 | 18 | 39.0 | 67.7 | 0.178 |
| 51306 | 30 | 60 | 21 | 49.2 | 88.3 | 0.278 |
| 51307 | 35 | 68 | 24 | 55.2 | 105.0 | 0.396 |
| 51308 | 40 | 78 | 26 | 72.7 | 138.0 | 0.554 |
| 51309 | 45 | 85 | 28 | 77.5 | 153.0 | 0.698 |
| 51310 | 50 | 95 | 31 | 92.3 | 186.0 | 0.984 |
| 51312 | 60 | 110 | 35 | 119.0 | 248.0 | 1.450 |
| 51314 | 70 | 125 | 40 | 136.0 | 294.0 | 2.150 |
| 51316 | 80 | 140 | 44 | 159.0 | 360.0 | 2.940 |
| 51318 | 90 | 155 | 50 | 185.0 | 425.0 | 4.100 |
| 51320 | 100 | 170 | 55 | 225.0 | 520.0 | 5.420 |
Тяжёлая однонаправленная — Серия 514
11 представительных моделей | Данные по каталогам SKF/NTN/NSK
| Модель | d (mm) | D (mm) | T (mm) | Ca (kN) | C0a (kN) | Масса (кг) |
|---|---|---|---|---|---|---|
| 51405 | 25 | 60 | 24 | 55.6 | 89.2 | 0.336 |
| 51406 | 30 | 70 | 28 | 72.8 | 126.0 | 0.504 |
| 51407 | 35 | 80 | 32 | 87.1 | 155.0 | 0.738 |
| 51408 | 40 | 90 | 36 | 106.0 | 194.0 | 1.060 |
| 51409 | 45 | 100 | 39 | 124.0 | 233.0 | 1.420 |
| 51410 | 50 | 110 | 43 | 146.0 | 282.0 | 1.880 |
| 51412 | 60 | 130 | 51 | 198.0 | 395.0 | 3.100 |
| 51414 | 70 | 150 | 60 | 241.0 | 496.0 | 4.950 |
| 51416 | 80 | 170 | 68 | 287.0 | 610.0 | 7.160 |
| 51418 | 90 | 190 | 77 | 335.0 | 740.0 | 10.300 |
| 51420 | 100 | 210 | 85 | 380.0 | 865.0 | 13.400 |
лёгкие Spherical Aligning Seat — Серия 532
12 представительных моделей | Данные по каталогам SKF/NTN/NSK
| Модель | d (mm) | D (mm) | T (mm) | Ca (kN) | C0a (kN) | Масса (кг) |
|---|---|---|---|---|---|---|
| 53200 | 10 | 26 | 11 | 12.7 | 17.1 | 0.032 |
| 53201 | 12 | 28 | 11 | 13.2 | 19.0 | 0.036 |
| 53202 | 15 | 32 | 12 | 16.6 | 24.8 | 0.048 |
| 53203 | 17 | 35 | 12 | 17.2 | 27.3 | 0.055 |
| 53204 | 20 | 40 | 14 | 22.8 | 37.7 | 0.085 |
| 53205 | 25 | 47 | 15 | 27.8 | 50.4 | 0.115 |
| 53206 | 30 | 52 | 16 | 29.3 | 58.2 | 0.143 |
| 53207 | 35 | 62 | 18 | 39.4 | 78.2 | 0.228 |
| 53208 | 40 | 68 | 19 | 47.3 | 98.2 | 0.288 |
| 53209 | 45 | 73 | 20 | 48.5 | 105.0 | 0.322 |
| 53210 | 50 | 78 | 22 | 52.5 | 118.0 | 0.388 |
| 53212 | 60 | 95 | 26 | 73.3 | 172.0 | 0.740 |
средние/Тяжёлый сферический Aligning Seat — Серия 533
9 представительных моделей | Данные по каталогам SKF/NTN/NSK
| Модель | d (mm) | D (mm) | T (mm) | Ca (kN) | C0a (kN) | Масса (кг) |
|---|---|---|---|---|---|---|
| 53304 | 20 | 42 | 16 | 30.5 | 47.5 | 0.125 |
| 53305 | 25 | 52 | 18 | 39.0 | 67.7 | 0.185 |
| 53306 | 30 | 60 | 21 | 49.2 | 88.3 | 0.288 |
| 53307 | 35 | 68 | 24 | 55.2 | 105.0 | 0.410 |
| 53308 | 40 | 78 | 26 | 72.7 | 138.0 | 0.574 |
| 53309 | 45 | 85 | 28 | 77.5 | 153.0 | 0.722 |
| 53310 | 50 | 95 | 31 | 92.3 | 186.0 | 1.020 |
| 53312 | 60 | 110 | 35 | 119.0 | 248.0 | 1.500 |
| 53314 | 70 | 125 | 40 | 136.0 | 294.0 | 2.220 |
Все модели доступны с P5, P4, P0 класс точностиs. Standard material: GCr15 (100Cr6/52100) подшипниковая сталь with pressed steel cage. Обработанный латунный сепаратор (M suffix) available for высокоскоростной or высокотемпературный applications. Двунаправленная (522/523/524) and sealed variants available on request. Контакты engineering for complete catalog including non-standard sizes.
Where Упорные шарикоподшипники Excel
Любое применение, где основная нагрузка — осевая — от прецизионных шпинделей станков до тяжёлого промышленного подъёмного оборудования
Шпиндели станков
Vertical milling spindles, drilling spindles, and boring mill quills where the spindle weight and cutting thrust create pure осевая нагрузкаing. 512 series widely specified for preloaded thrusts in CNC vertical обрабатывающий центрs.
Вращающиеся делительные столы
Support the table weight and clamping thrust in CNC поворотный столs and precision indexing mechanisms. Двунаправленная 522 series used where upward workpiece ejection forces must also be supported.
Опора ходового винта
Provide axial location for ход screws and ball screws in machine tool feed axes. Compact 511 серии at the screw end поглощает thrust while allowing the screw to rotate freely. Идеально для manual and powered machine slides.
Крюки и подъёмники кранов
Heavy-series 513 and 514 упорные подшипники in крюк крана assemblies, supporting the full lifted load. Spherical 533 series preferred where hook swivel alignment cannot be guaranteed under динамическая нагрузкаing.
Вертикальные насосы
Support the ротор weight and hydraulic thrust in vertical turbine pumps, deep-well pumps, and vertical mixed-flow pumps. 511 or 512 series selected based on impeller thrust calculations and pump head pressure.
Автомобильные трансмиссии
Thrust washers and шарикоподшипники in automatic transmission clutch packs and manual transmission gear stacks. Compact 511 series for light vehicle gearboxes; 512 series for heavy commercial vehicle transmissions.
Морские гребные валы
Heavy-duty 514 series упорные подшипники поглощает propeller thrust in small-to-medium vessel drive trains. Нержавеющая стальs available for corrosion resistance in saltwater and bilge environments.
Экструдеры и литьё под давлением
Absorb screw thrust in plastic экструдерs and термопластавтоматs. 513 series with heavy поперечное сечение поглощаетs continuous осевая нагрузкаs during plastication and injection phases with minimal deflection.
Почему выбирают Our Упорные шарикоподшипники
Engineered with key design имеет that distinguish precision thrust шарикоподшипники for industrial applications
Separable Конструкция
Shaft washer, корпусная шайба, and шариково-сепараторная сборка mount independently. Simplifies installation in confined spaces. Each component can be fitted with the correct interference or посадка с зазором for optimal performance.
High Axial Capacity
Optimized internal geometry and комплект шариков maximize осевая нагрузка rating. The line from light 511 to extra-heavy 514 series предлагает a 5× axial capacity range for the same размер отверстия.
Самовыравниваниеment Option
532 and 533 series with spherical корпусная шайбаs поглощает up to 3° of static угловое смещение — protecting the bearing from краевая нагрузка and premature failure when mounting surfaces are imperfect.
Двунаправленная Option
522/523/524 series with two ball rows accommodate reversing осевая нагрузкаs. Essential for двунаправленная ход screws, vertical spindles with tool-change thrust reversal, and oscillating axial motion applications.
Stable at Скорость
Pressed steel or machined brass cage guides balls precisely while maintaining low friction. Factory-applied preservative обеспечивает initial lubrication and corrosion protection during shipping and storage.
Premium Материал
Rings and balls in GCr15 (100Cr6/52100) high-carbon хромистая сталь, сквозной закалки to 58–64 HRC. Dimensional stability heat treatment гарантирует consistent performance from -20°C to +120°C operating range.
Нужны Упорные шарикоподшипники for Your Application?
Сообщите нам размер отверстия, thrust load magnitude and direction, speed requirement, and preferred series. Наши инженеры по применениям provide a competitive quotation with detailed technical documentation within 24 hours.
Получить выгодное предложение
Заполните форму ниже, и наша инженерная команда ответит в течение 24 часов с ценами и технической документацией.
Связанные продукты
Посмотрите наш полный ассортимент электрошпинделей, линейных направляющих и подшипников
Упорные шарикоподшипники Часто задаваемые вопросы
What is the difference between single and двунаправленная thrust ball bearings?
Однонаправленная thrust bearings (511, 512, 513, 514 series) support axial loads in one direction only. Двунаправленная bearings (522, 523, 524 series) support axial loads in both directions and consist of two shaft washers, two ball-and-cage assemblies, and one center housing washer. Однонаправленная types are more common for most machine tool applications; двунаправленная is used when reversing axial loads are expected.
Могут ли упорные шарикоподшипники работать на высоких скоростях?
Thrust ball bearings have lower speed ratings than radial ball bearings due to centrifugal forces on the balls. Typical speed limits are 2,000-8,000 RPM depending on size. For high-speed thrust applications, consider радиально-упорный шарикоподшипникs in tandem arrangement, which handle both radial and axial loads at higher speeds. Our engineering team can help select the optimal bearing configuration for your speed requirements.
Что такое самоустанавливающийся упорный шарикоподшипник?
The 532 and 533 series feature a spherical housing washer that mates with a corresponding spherical seat, allowing the bearing to compensate for angular misalignment between shaft and housing. This is particularly useful when perfect shaft-to-housing perpendicularity cannot be guaranteed. 533 series combines the load capacity of 513 series with the self-aligning feature of 532 series for heavy-duty misaligned applications.